RS-232 to Singlemode Fiber Optic Converter | rdc232SFO
$ 669.00 exc. GST
Our RS-232 to Singlemode Fiber Optic Converter (rdc232SFO) robustly connects your panel mounted RS-485 devices to fiber optic cables up to 20km long, providing the ultimate in isolation, surge, and noise protection.
Warranty: 36 months
rdc232SFO Data Sheet Contact for serviceBuild Option:
RS-232 to Singlemode Fiber Optic Converter | rdc232SFO
Product Code: rdc232SFO, rdc232SFO-dv-2p-sc-d
Key features:
- Isolates and converts between optical and RS-232 signals
- Various isolation options available
- Intrinsic isolation at fiber sides
- 3-wire operation (TX, RX, GND) at RS-232 side
- Protocol Independent
Specification
Fiber Optic
- Interface: 1310 nm full duplex (Remote)
- Connectors: ST(bayonet), SC or FC (Remote)
- Fiber Size: 9/125 µm
- Power Budget: 15 dbm @ 65 °C on 9/125 um cable
RS-232
- Signal Type: EIA/RS-422A & RS-485A
- Voltage Level: -7 to +12 vDC
- Permitted Surge: +/- 25 vDC
Isolation
- RS-232 to fiber: Intrinsically isolated
- Supply to fiber: Intrinsically isolated
- Supply to RS-232: 1-port = none ; 2-port = 2.5Kv
Power Supply:
- 9v to 36v DC: 35 mA (Max)
- 5v DC +/- 5%: 140 mA (Max)
- LEDs (green) indicates incoming power supply
Communication:
- Max Speed: Up to 115Kbps, no configuration required
- Character Setting: transparent, no configuration required
- User Indications: Yellow LEDs for both directions
- Standard Distance:
- 15m for EIA/RS-232 (For 50m, requires quality, low-cap cable < 50 pf/m)
- 20 Km with 9/125 µm fiber (Depends on attenuation loss, no. of splices etc. along FO cable)
Mechanical / Environment:
- Operating Range: -10 °C to +65 °C
- Storage Range: -40 °C to +85 °C
- Relative Humidity: 10 to 90% RH, non-condensing
- Terminals: wire up to 2.5mm (12 AWG)
- Case Material: nylon polyamide, fungus and termite resistant, self-extinguishing, epoxy potting
- Weight: approx. 130g
- Mounting Rail: DIN EN 50 022 (35 mm symmetrical) or DIN EN 50 035 (32 mm asymmetrical)
About Robust DataComm
Robust DataComm Pte Ltd is a Singapore-based company specialising in industrial communication products since 1994. The company is backed with decades of industrial experience and coupled with our well-documented processes
Capabilities
RDC devices is design with fully galvanic isolation and capabilities to meet, solve and maintained industrial data communication network in harsh environment.
Our devices have three ports of isolation with both sides of the data communication having floating power supplies. Our data direction control is fully automated
In case of receiving any unnatural activation or surge from the power supply or signal line, it will not further damage to other parts of the system.
In term of function, we focus and specific on only one function without any complicating settings and only minimum settings are require. It is easily install and connect mainly plug and screw.
Our device have a wider range of power supply voltage ranging from 9 ~ 36VDC.
We designed the device to smaller size for compact environment. The weight is very light with case material made of polyamide nylon, fungus and termite resistant and self-extinguishing (UL94 V2) as stated in our datasheets.
Related products
Fiber Media Converters
Fiber Media Converters
Fiber Media Converters
Fiber Media Converters
Fiber Media Converters
Fiber Media Converters
Single/Dual Port Fiber Optic Converter with Digital I/O [rdcFoms-DIO-gv-2p-st]
Fiber Media Converters
Fiber Media Converters
Multimode to Multimode Fiber Optic Repeater / Extender [rdcMMFO]
